SHENZHEN DIXUAN METAL CO., LTD.
Delivering micron-level edge quality, minimal heat-affected zones (HAZ), and structural integrity tailored for South Korea's aerospace industrial clusters.
High-precision fiber cutting and integrated cold riveting for avionics frames, electronic warfare enclosures, and airborne bracketry.
Burr-free lightweight aluminum structural components engineered for Korean light fighters, satellite panels, and fuselage rib reinforcements.
End-to-end full-process manufacturing adhering strictly to international aerospace tolerances and zero-defect quality inspections.
Ultra-clean edge micro-cutting, bespoke cabin interior hardware, and precision assembly fixtures with custom anodized surface finishes.
South Korea is rapidly advancing into a top-tier global aerospace hub, driven by national defense projects, satellite mega-constellations, and revolutionary Urban Air Mobility (UAM) flight vehicles.
The Republic of Korea's aerospace landscape is characterized by world-class innovation concentrated across key manufacturing hubs such as the Gyeongsangnam-do Aerospace Cluster (Sacheon, Jinju, and Changwon) and the Daejeon R&D District. Major aerospace primes—including Korea Aerospace Industries (KAI), Hanwha Aerospace, LIG Nex1, and Korean Air Aerospace Division (KAL-ASD)—demand unprecedented precision, supply chain agility, and rigorous AS9100 quality compliance.
With massive domestic milestones like the KF-21 Boramae 4.5+ generation multirole fighter, the FA-50 light combat aircraft international exports, and the indigenous KSLV-II (Nuri rocket) space launch program, component requirements have shifted dramatically toward advanced alloy laser cutting, tighter geometric dimensioning and tolerancing (GD&T), and rapid turnaround prototyping.
Leveraging high-power multi-kilowatt fiber laser cutting systems equipped with high-purity nitrogen assist gas to deliver burr-free, ready-to-weld edges on superalloys and aviation aluminum.
High-beam-quality multi-kilowatt fiber lasers guarantee superior beam focus, narrow kerf widths, and flawless contouring for complex aviation geometry with zero tool wear.
Prevent surface oxidation during the laser melting process. Delivers shiny, pristine edge finishes on stainless steel and aluminum, eliminating the need for post-cut acid pickling.
Seamlessly integrated CNC press brake bending, hardware insertion (PEM staking), automated riveting, TIG/laser welding, chromate conversion (MIL-DTL-5541), and anodizing.
| Material Classification | Common Aerospace Grades | Cutting Thickness Range | Tolerance Standards | Primary Korean Application Areas |
|---|---|---|---|---|
| Aerospace Aluminum | Al 5052-H32, 6061-T6, 7075-T651, 2024-T3 | 0.5 mm – 25.0 mm | ±0.03 mm – ±0.05 mm | Fuselage skins, avionics trays, internal bracketry, UAM frames |
| Titanium Alloys | Ti-6Al-4V (Grade 5), Grade 2, Ti-6Al-2Sn-4Zr-2Mo | 0.5 mm – 15.0 mm | ±0.02 mm – ±0.04 mm | Jet engine heat shrouds, rocket nozzle supports, structural fittings |
| Nickel Superalloys | Inconel 718, Inconel 625, Hastelloy X | 0.5 mm – 12.0 mm | ±0.03 mm – ±0.05 mm | Combustion liners, exhaust diffusers, high-temperature gas baffles |
| Aviation Stainless Steel | 17-4PH, 15-5PH, 316L, 304, 321 Stainless | 0.3 mm – 30.0 mm | ±0.02 mm – ±0.05 mm | Fuel lines, hydraulic mounting plates, radar chassis, defense consoles |
| Copper & Specialty Brass | C11000 ETP Copper, C26000 Cartridge Brass | 0.5 mm – 10.0 mm | ±0.04 mm – ±0.06 mm | Thermal heat sinks, satellite electrical busbars, RF shielding gaskets |
Established in 2015, Shenzhen DIXUAN Metal Co., Ltd. is a comprehensive enterprise specializing in custom metal product manufacturing and processing. The company operates a 3,600-square-meter integrated warehousing and production facility, equipped with advanced automated processing machinery, covering a range of mature technologies, including laser cutting, bending, CNC machining, stamping, surface treatment, and so on, delivering end-to-end processing capabilities from design to finished products.
What do we do? DIXUAN Metal focuses on producing a diverse range of customized metal products, such as nameplates, equipment panels, enclosures, lampshades, pad printing plates, aluminum composite panels, and precision components, which are widely applied in various industries. With a commitment to consistent product quality and efficient delivery capabilities, the company has achieved an annual sales revenue of CNY 80 million, distributing products to both domestic and international markets.
How digital CAM nesting, 3D 5-axis laser cutting, and lightweight multi-material structures are setting new benchmarks for Korean aerospace production.
Korean defense primes are persistently aiming to lower dry weight in next-gen UAVs and missile airframes to increase payload capacity and flight range. Laser cutting 7075-T6, 2024-T351, and specialized aluminum-lithium (Al-Li) alloys presents distinct thermal challenges due to high reflectivity and cracking susceptibility. Our advanced high-frequency fiber laser oscillators solve this via fine-pulse wave controls, ensuring crystal-clean edge geometries without stress risers.
In aerospace manufacturing, raw material costs for titanium and mil-certified aerospace sheets are extremely high. Dixuan Metal implements AI-powered nesting algorithms that optimize cutting paths, common-line cutting, and micro-joint nesting. This drives material utilization above 88%, drastically slashing unit manufacturing costs for our South Korean partners.
From initial laser piercing to secondary passivation and chromate conversion, every aerospace order is subjected to coordinate measuring machine (CMM) dimensional checks, optical surface roughness audits, and full Material Test Report (MTR) traceability.
Proven manufacturing solutions across fixed-wing, rotary-wing, orbital launch systems, and satellite ground control equipment.
Micro-perforated acoustic panels, internal wing spar clips, stringer splices, and passenger cabin partition sheets fabricated from 5052-H32 and 6061-T6 aluminum alloys.
Complex CNC folded and laser-profiled chassis, radar signal processor housings, and ATR (Air Transport Rack) boxes with integrated PEM nuts and conductive surface treatments.
High-temperature laser cutting of Inconel 718 and 321 stainless steel sheets for auxiliary power unit (APU) firewalls, jet nozzle heat shields, and missile launch guide rails.
Precision-milled and laser-trimmed ultra-thin titanium/aluminum structural frames for Low Earth Orbit (LEO) microsatellites and deep-space optical instruments.
Heavy-duty stainless and carbon steel structural templates, assembly jig sheet parts, calibration targets, and flight line test cart components.
Rapid iterative prototyping of composite-backed metal battery enclosures, rotor mast sheet metal cowlings, and ultralight emergency egress hardware.
Essential information on quality verification, rapid shipping to South Korea, material certifications, and secondary surface finishing options.
For rapid prototyping batches (1–20 pcs), laser cutting, CNC bending, and deburring are typically completed within 3 to 5 business days. Express air freight to Incheon International Airport (ICN) or Gimhae Airport (PUS) takes only 24 to 48 hours. Mass production orders are scheduled with scheduled ocean container deliveries to Busan Port.
Yes. Every batch of aerospace-grade metals (including 5052-H32, 6061-T6, 7075-T6, Ti-6Al-4V, and Inconel) is accompanied by genuine mill test certificates (MTC/MTR), chemical composition analyses, mechanical property sheets, and full dimensional inspection CMM reports complying with ISO 9001 and aerospace standards.
We utilize ultra-high-pressure Nitrogen (N₂) cutting gas at pressures up to 25 bar combined with dynamic focal positioning fiber optics. This rapidly expels molten material from the kerf before excessive thermal energy conducts into the adjacent metal matrix, ensuring an Ra < 1.6 μm edge with near-zero HAZ and zero oxide formation.
Absolutely. Beyond laser cutting and bending, our 3,600m² facility provides complete in-house and partnered surface treatment workflows: MIL-A-8625 Type II & Type III hard anodizing, Alodine / SurTec 650 chromate conversion (MIL-DTL-5541), precision powder coating, passivating, laser marking, and automated hardware riveting.
High-precision manufactured metal parts, custom enclosures, and aerospace-ready assemblies for Korean engineering projects.
Precision press-brake bending, high-speed laser cutting, and aerospace cold riveting for avionics frames.
Lightweight high-yield strength aluminum airframe components, brackets, and internal partitions.
Comprehensive sheet forming, laser profiling, and welding for high-stress defense equipment.
Intricate contour cutting, high-tolerance decorative fixtures, and custom surface anodized metal ware.
Electromagnetic shielding enclosures and radar mounting plates built with micro-precision tolerance.
High-strength ultra-light structural brackets for cubesats, microsatellites, and LEO satellite payload arrays.
316L and 17-4PH stainless steel precision laser cutting for ground fueling systems and rocket test rigs.
Commercial airliner premium cabin fixtures, laser-perforated decorative grilles, and tactile consoles.