SHENZHEN DIXUAN METAL CO., LTD.
Direct mill supply of heavy-duty aluminum tread plates and patterned alloys engineered to exceed strict North American slip resistance, tensile strength, and corrosion criteria.
The industrial landscape in the United States is witnessing a historic transition toward high-strength, lightweight non-ferrous metals. In response to the Federal Highway Administration’s weight limits, the rapid electrification of commercial vehicle fleets (Class 4 through Class 8), and heightened OSHA safety compliance in fulfillment and processing centers, the demand for high-caliber aluminum checker sheets (commonly specified as diamond plate, floor tread plate, or five-bar durbar plate) has reached historic highs.
American industrial contractors, logistics equipment manufacturers, and marine fabricators require mill-direct materials that combine superior yield strength with unyielding atmospheric corrosion resistance. From cold-chain refrigerated trailers navigating the Rust Belt's salted winter highways to high-salinity offshore installations along the Texas and Louisiana Gulf Coast, our rolled aluminum tread sheets fulfill every critical American metric.
Every pound trimmed from trailer superstructures, side skirts, and reefer decking translates directly into extended battery operational range or increased payload freight revenue. Replacing heavy welded carbon steel with cold-rolled 6061-T6 and 5052-H32 diamond plate delivers up to a 60% reduction in tare weight across American logistics fleets.
Under OSHA Title 29 CFR 1910.22, commercial industrial platforms, mezzanines, and emergency stairways must present reliable slip-resistant profiles in wet, oily, or chemical conditions. Dixuan's raised 5-bar and diamond configurations provide dependable traction across food plants and power generation hubs.
From transcontinental trucking corridors to specialized maritime yards and tech facilities, our aluminum checker sheets serve crucial roles across distinct American industrial centers.
Centering around Indiana, Ohio, Michigan, and Illinois, trailer OEMs consume thousands of tons of 3003-H22 and 5052-H32 diamond sheets annually. Used extensively for rear ramp gates, reefer subflooring, step wells, interior wall kickplates, and exterior gravel guards protecting heavy-duty rigs.
Across the humid and saltwater-dense environments of Texas, Louisiana, and Florida, marine fabricators demand 5052-H32 and 6061-T6 tread plates. Essential for gangways, crew boat decks, offshore drilling catwalks, and coastal chemical processing access stairs requiring saltwater resistance.
From aerospace tooling staging in Washington State to automated distribution centers and pharmaceutical manufacturing across the Northeast, embossed and brushed aluminum sheets serve as cleanroom anti-slip flooring, baggage conveyors, and architectural protective surfaces.
Modern engineering practices are moving well beyond basic mill-finish diamond plates toward smart, pre-processed, surface-treated aluminum alloys designed for automated assembly lines.
Traditional raw mill finish sheets are frequently prone to galvanic reaction, surface pitting, or staining when exposed to aggressive road de-icers (magnesium chloride / calcium chloride) widely sprayed across northern US highways. In response, Dixuan Metal provides high-micron clear anodized, hard anodized, and electrostatically powder-coated checker sheets that maintain surface aesthetics and non-slip safety over decades of harsh seasonal use.
Furthermore, American manufacturers are shifting toward digitally cut, ready-to-weld tread kits. We supply precision CNC-cut, punched, chamfered, and brake-formed aluminum checker sheet components directly to North American assembly plants, significantly shortening vehicle assembly cycle times and eliminating on-site metal scrap.
Class 6-8 zero-emission electric trucks require robust battery casing armor that doubles as maintenance access flooring. Deep-embossed 6061-T6 diamond plate delivers puncture resistance against road debris while fulfilling structural floor stiffening functions.
Contemporary American architects are specifying black anodized diamond plate and five-bar sheets for mission-critical tech data centers, luxury commercial garages, elevators, and flagship retail interiors seeking a functional, futuristic aesthetic.
US metal service centers and wholesale stockists are building strategic dual-source supply chains to buffer domestic rolling mill lead times. Reliable international supply partnerships with stringent quality certifications ensure inventory continuity through demand spikes.
Carefully select the optimal aluminum alloy and temper to balance yield strength, weldability, cold workability, and corrosion resistance for your target American industrial application.
| Alloy & Temper | Tensile Strength (MPa / ksi) | Yield Strength (MPa / ksi) | Elongation (%) | Corrosion Resistance | Key US Industrial Applications |
|---|---|---|---|---|---|
| 3003-H22 | 140 - 180 / 20 - 26 | 115 - 150 / 17 - 22 | 8 - 12% | Good (Atmospheric) | Utility trailer interiors, kickplates, truck toolbox lids, decorative store fixtures, light industrial ramps. |
| 5052-H32 | 215 - 265 / 31 - 38 | 160 - 200 / 23 - 29 | 10 - 15% | Exceptional (Marine / Salt Spray) | Boat decking, dock gangways, chemical washdown tanks, refrigerated trailer flooring, heavy-duty truck side steps. |
| 6061-T6 | 290 - 330 / 42 - 48 | 240 - 280 / 35 - 41 | 8 - 10% | Very High (Structural) | Industrial mezzanines, trench covers, railway car floor platforms, heavy structural walkways, defensive vehicle components. |
| 1060 / 1100-H14 | 95 - 125 / 14 - 18 | 75 - 100 / 11 - 15 | 15 - 25% | High (Chemical / Ductile) | HVAC insulation cladding, hammer-embossed thermal reflective shielding, battery box lining, architectural facades. |
* Compliant with ASTM B632/B632M (Rolled Tread Plate) and ASTM B209 standards. Mill Test Reports (MTR 3.1) with full chemical and mechanical spectroscopy provided with every shipment.
Explore how our heavy-duty diamond and five-bar checker sheets safeguard personnel, enhance equipment service lifespans, and deliver functional utility in demanding operational settings.
Equipping refrigerated reefers and dry van trailers with 3003-H22 and 5052-H32 diamond floorboards. Withstands high-frequency forklift wheel loads, power pallet jacks, and rigorous power-washing sanitization routines without buckling or corroding.
Providing slip-resistant traction across chemical processing plants, water treatment facilities, and distribution center mezzanines. Raised pattern profiles channel fluids and oils away from worker contact surfaces to minimize slips and falls.
Installed along commercial fishing vessel decks, floating marina docks, passenger ferry boarding ramps, and pilot boats. 5052 marine alloy delivers non-sparking, non-magnetic properties with total resistance to brackish and open-ocean saltwater attack.
Employed in high-traffic data halls, specialized server maintenance staging bays, elevator interiors, and industrial-modern architectural entrances. Delivers an ultra-clean, tech-focused aesthetic combined with indestructible barrier protection.
Business Philosophy
Industry Focus & Innovation: Concentrating on surface treatment while leading industry progress through innovation.
Efficient & Steady Growth: Driving corporate development through operational efficiency while maintaining financial stability.
Value Creation & Mutual Success: Building a healthy industrial ecosystem to achieve win-win results for customers and the supply chain.
Corporate Mission
Mission: To Create a Better Life and Build an Outstanding Brand.
Driven by the original intention of enhancing lives and the goal of establishing a premier brand, Dixuan Metal continuously pushes boundaries. We pursue excellence and join hands with customers and partners to win the future together.
Our manufacturing practices adhere to certified global quality management systems, ensuring total reliability and consistency for American commercial and governmental tenders.
Explore our complete catalog of specialized aluminum sheet products tailored for US distributors, sheet metal fabrication shops, architectural contractors, and transport builders.
Essential guidance on ASTM certifications, imperial dimensioning, container packaging, and shipping logistics to major United States sea ports.
In the North American market, the single raised "Diamond" or "Propeller" pattern is the traditional standard for utility truck beds and decorative steps. The European-developed "Five-Bar" pattern, however, offers multi-directional slip resistance and superior grip when wet or oily. Both patterns are manufactured to ASTM B632 standards with custom lug heights to fulfill distinct aesthetic and functional customer criteria.
Yes. We routinely roll and shear aluminum tread plates to standard US gauge and imperial dimensions: 48" x 96" (4x8 ft), 48" x 120" (4x10 ft), 48" x 144" (4x12 ft), and 60" x 120" (5x10 ft). Thickness ranges from 0.045" (approx. 1.2mm) up to 0.375" (3/8" or 9.5mm), measured from the smooth flat base plate excluding the raised lug height.
All checker plates intended for US maritime container transit receive protective laser-grade or easy-peel PE protective films on the pattern face. Sheets are interleaved with neutral moisture-inhibiting paper, bound with heavy steel strapping, and seated on fumigated solid wood pallets complying with ISPM-15. Desiccant packs prevent white rust formation caused by ocean humidity variations.
We routinely deliver Full Container Loads (FCL) to major North American commercial seaports including Long Beach and Los Angeles on the West Coast; Houston on the Gulf Coast; and Savannah, Charleston, and New York/New Jersey on the East Coast. Standard manufacturing lead time is 15 to 25 days from contract finalization, with comprehensive MTR documentation supplied prior to vessel departure.